CS302 Final term Paper Solved 2010 - 2

FINALTERM  EXAMINATION Spring 2010
CS302- Digital Logic Design (Session - 4) 

Time:90 min
M a r k s: 58
 
CS302 Question No: 1    ( M a r k s: 1 )   
The ANSI/IEEE Standard 754 defines a __________Single-Precision Floating Point format for binary numbers. 
       8-bit       ► 16-bit       ► 32-bit       ► 64-bit
CS302 Question No: 2    ( M a r k s: 1 )   
The decimal “17” in BCD will be represented as _________
       ► 11101       ► 11011       ► 10111       ► 11110
CS302 Question No: 3    ( M a r k s: 1 )   
The basic building block for a logical circuit is _______
       ► A Flip-Flop       ► A Logical Gate       ► An Adder       ► None of given options
CS302 Question No: 4    ( M a r k s: 1 )   
The output of the expression F=A.B.C will be Logic ________ when A=1, B=0, C=1.
       ► Undefined       ► One       ► Zero       ► No Output as input is invalid.
CS302 Question No: 5    ( M a r k s: 1 )    ________ is invalid number of cells in a single group formed by the adjacent cells in K-map
        ► 2        ► 8       
        ►
12        ► 16
CS302 Question No: 6    ( M a r k s: 1 )   
The PROM consists of a fixed non-programmable ____________ Gate array configured as a decoder.
        ► AND     
        ►
OR       ► NOT       ► XOR
CS302 Question No: 7    ( M a r k s: 1 )   
 ___________ is one of the examples of synchronous inputs.
       J-K input       ► EN input
       ► Preset input (PRE)
       ► Clear Input (CLR)   
CS302 Question No: 8    ( M a r k s: 1 )   
 ___________ is one of the examples of asynchronous inputs.
       J-K input       ► S-R input
       ► D input       ► Clear Input (CLR)  
CS302 Question No: 9    ( M a r k s: 1 )   
 The _____________ input overrides the ________ input
       Asynchronous, synchronous     
       ►
Synchronous, asynchronous
 
     ► Preset input (PRE), Clear input (CLR)       ► Clear input (CLR), Preset input (PRE)
   
CS302 Question No: 10    ( M a r k s: 1 )   
 __________occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay.
       Race condition       ► Clock Skew       ► Ripple Effect       ► None of given options
   
CS302 Question No: 11    ( M a r k s: 1 )   
 Consider an up/down counter that counts between 0 and 15, if external input(X) is “0” the counter counts upward (0000 to 1111) and if external input (X) is “1” the counter counts downward (1111 to 0000), now suppose that the present state is “1100” and X=1, the next state of the counter will be ___________
       0000       ► 1101       ► 1011
       ► 1111
CS302 Question No: 12    ( M a r k s: 1 )   
In a state diagram, the transition from a current state to the next state is determined by
       Current state and the inputs       ► Current state and outputs       ► Previous state and inputs       ► Previous state and outputs
   
CS302 Question No: 13    ( M a r k s: 1 )   
 ________ is used to minimize the possible no. of states of a circuit.
       State assignment       ► State reduction       ► Next state table       ► State diagram
   
CS302 Question No: 14    ( M a r k s: 1 )   
 ________ is used to simplify the circuit that determines the next state.
       State diagram       ► Next state table       ► State reduction       ► State assignment
   
CS302 Question No: 15    ( M a r k s: 1 )   
The best state assignment tends to ___________.
       Maximizes the number of state variables that don’t change in a group of related states       ► Minimizes the number of state variables that don’t change in a group of related states       ► Minimize the equivalent states       ► None of given options
CS302 Question No: 16    ( M a r k s: 1 )   
The output of this circuit is always ________.
alt
        ► 1       ► 0
       ► A
       ► alt
   
CS302 Question No: 17    ( M a r k s: 1 )   
 A 8-bit serial in / parallel out shift register contains the value “8”, _____ clock signal(s) will be required to shift the value completely out of the register.
       1       ► 2       ► 4       ► 8
   
CS302 Question No: 18    ( M a r k s: 1 )   
5-bit Johnson counter sequences through ____ states
       7       10
       32
       25
   
CS302 Question No: 19    ( M a r k s: 1 )   
 Assume that a 4-bit serial in/serial out shift register is initially clear. We wish to store the nibble 1100. What will be the 4-bit pattern after the second clock pulse? (Right-most bit first.)
       1100       ► 0011
       ► 0000       ► 1111
CS302 Question No: 20    ( M a r k s: 1 )   
The address from which the data is read, is provided by _______
       ► Depends on circuitry
       ► None of given options
       ► RAM
       ► Microprocessor
   
CS302 Question No: 21    ( M a r k s: 1 )   
FIFO is an acronym for  __________
       First In, First Out       Fly in, Fly Out       Fast in, Fast Out       None of given options
CS302 Question No: 22    ( M a r k s: 1 )   
LUT is acronym for _________
       Look Up Table       ► Local User Terminal       ► Least Upper Time Period       ► None of given options
   
CS302 Question No: 23    ( M a r k s: 1 )   
The voltage gain of the Inverting Amplifier is given by the relation ________
       Vout / Vin = - Rf / Ri       ► Vout / Rf = - Vin / Ri       ► Rf / Vin = - Ri /Vout       ► Rf / Vin =   Ri /Vout
   
CS302 Question No: 24    ( M a r k s: 1 )   
 ______ of a D/A converter is determined by comparing the actual output of a D/A converter with the expected output.
       Resolution       Accuracy       Quantization       ► Missing Code   
CS302 Question No: 25    ( M a r k s: 1 )   
alt  alt

Above is the circuit diagram of _______. 
       Asynchronous up-counter       ► Asynchronous down-counter
       ► Synchronous up-counter       ► Synchronous down-counter
CS302 Question No: 26    ( M a r k s: 1 )   
The sequence of states that are implemented by a n-bit Johnson counter is
       n+2 (n plus 2)       2n   (n multiplied by 2)       ► 2n   (2 raise to power n)       ► n2   (n raise to power 2)
   
CS302 Question No: 27    ( M a r k s: 2 )
 Draw the Truth-Table of NOR based S-R Latch
input
output
S
R
QT +1
0
0
QT
0
1
0
1
0
1
1
1
INVALID
 CS302 Question No: 28    ( M a r k s: 2 )alt 
Two state assignments are given in the table below. Identify which state assignment is best and why?
States
State assignment 1
State assignment 2
A
00
00
B
01
01
C
11
10
D
10
11
 Ans:
State assignment 2 is best assignment it Minimizes the number of state variables that don’t change in a group of related states
CS302 Question No: 29    ( M a r k s: 2 )
 Write down at least two functions of a register.
Ans:
1.      Registers are operating as a coherent unit to hold and generate data.
2.      registers functions also include configuration and start-up of certain features, especially during initialization, buffer storage e.g. video memory for graphics cards, input/output (I/O) of different kinds,
CS302 Question No: 30    ( M a r k s: 2 )
Define quantization process.
Ans:
The process by which we can convert an analogue signal into digital signal (code) is known as quantization process.
CS302 Question No: 31    ( M a r k s: 3 )
How can we calculate the frequency of an unknown signal? 
Ans:
The frequency of a particular event is accomplished by counting the number of times that event occurs within a specific time interval, then dividing the count by the length of the time interval.
CS302 Question No: 32    ( M a r k s: 3 )
Given the following statement used in PLD programming:
Y PIN 23 ISTYPE ‘com’;
Explain what does this statement mean?
Ans:
The Y variable is a ‘Combinational’ output available directly from the AND-OR gate array output. The active-low or active-high output of the Registered Mode can also be specified in the declaration statement
CS302 Question No: 33    ( M a r k s: 3 )
Explain dynamic RAM in your own words. 
Ans:
Dram use latch to store a single bit of information.the main drawback of it id the discharge of capacitor over a period of time.here four gates are used in making a singlelatch. In terms of transistors, 4 to 6 transistors are required to implement a single storage cell. In order to build memories with higher densities, a single transistor is used to store a binary value. A single transistor can not store a binary value however it is used to charge and discharge a capacitor.The capacitor can not retain the charge, therefore it has to be periodically charged
through a refresh cycle.
CS302 Question No: 34    ( M a r k s: 5 )
You are given the Next-state table of a moor machine, using this information draw the state diagram of the machine.

Present State
Next State
Q2
Q1
Q0
Q2
Q1
Q0
0
1
1
1
1
1
1
1
1
0
0
1
0
0
1
0
1
0
0
1
0
1
0
0
1
0
0
1
1
0
1
1
0
0
1
1
    
CS302 Question No: 35    ( M a r k s: 5 )
Explain Memory Select or Enable Signals
Memory Select or Enable Signal:

 There are more than one memory chips to store program
Information in daily use computers. read or write operation is carried out on a single addressable location instantaneously . 
The unique location is accessed in one of the several memory chips, so single memory chips is selected before a read or write operation can be carried out. All memory chips have a chip enable or chip select signal which has to be activated before the memory can be accessed.
CS302 Question No: 36    ( M a r k s: 5 )
Performance characteristics of D/A converters are determined by five parameters. Name them.
Ans:
Performances characteristics of D/A converters are determined by five parameters are as follow:
  1. Accuracy
  2. Setting time
  3. Monotonicity
  4. Linearity
  5. Resolution

Leave a Reply

Related Posts Plugin for WordPress, Blogger...